The Workflow For Car; Car Policy Configuration; Per Interface Rate Control (Pirc) Support - Cisco 12000 User Manual

The Workflow for CAR

The Workflow for CAR
To begin working with CAR objects, proceed as follows:
Create and configure a CAR policy.
Step 1
Create and configure an access list (optional).
Step 2
Apply one or more access lists to the CAR policy.
Step 3
Apply the created CAR policy to one or multiple interfaces.
Step 4
At any given time, you also have the option to edit or delete CAR policies (which are not applied),
change the association of CAR policies, or view the status of CAR policies on any interface.

CAR Policy Configuration

CAR policies can rate limit traffic based on certain matching criteria, such as incoming interface, IP
Precedence, or IP access list. You configure the actions CAR will take when traffic conforms to or
exceeds the rate limit. You can set CAR policies that are associated with one of the following:
•
•
•
•
Each interface can have only one CAR policy applied.
The CAR Policies section covers the following areas:
•
•
•

Per Interface Rate Control (PIRC) Support

From the operator's perspective, the same workflows used for CAR will be available for the creation,
application and maintenance of PIRC Policies. Specifically, the following functions are applicable to
PIRC:
•
•
•
•
Cisco 12000/10700 v3.1.1 Router Manager User Guide
11-6
All IP traffic
IP precedence
MAC address
IP access list, both standard and extended. Matching to IP access lists is more processor-intensive
than matching based on other criteria.
Creating a CAR Policy
Applying an Access List to a CAR Policy
CAR Policy Configuration Window—Detailed Description
Incoming only (Rx direction)
Only one rule is allowed in a PIRC statement
Available conform-actions are:
drop
–
set-prec-transmit
–
transmit
–
No access-group matching is available in Cisco 12000/10720 Router Manager
Chapter 11 Layer 3 QoS
OL-4455-01