Chapter 3
Getting Started
Performing Pre-deployment
Say that you are expecting the following hardware:
•
•
To perform both manual pre-deployment and offline configuration, proceed as follows:
Step 1
Manually deploy a site object. See
for further details.
Step 2
Manually deploy the Cisco 12000 Series Router chassis under a site. See
12000/10720 Chassis" section on page 3-20
Step 3
Manually deploy GRP(s). See
details.
Step 4
Manually deploy the ATM line cards. ATM interfaces are deployed simultaneously. See
Deploying Line Cards" section on page 3-38
Manually deploy the POS line cards. POS interfaces are deployed simultaneously. See
Step 5
Deploying Line Cards" section on page 3-38
Now you have pre-deployed and thus created representative objects in Cisco 12000/10720 Router
Manager for your expected hardware, modules, and interfaces. All of these objects will be in the
Decommissioned state.
OL-4455-01
Cisco 12016 chassis and GRP(s)
ATM and POS line cards (with respective interfaces)
"Manually Deploying a Generic Site Object" section on page 3-10
for further details.
"Manually Deploying a GRP Card" section on page 3-31
for further details.
for further details.
Cisco 12000/10700 v3.1.1 Router Manager User Guide
Deployment
"Manually Deploying a Cisco
for further
"Manually
"Manually
3-59