Configuring An Atm Interface - Cisco 12000 User Manual

Chapter 8 Interface Configuration
The ATM Interface Configuration window appears:
Figure 8-2
Step 2 Choose a Chassis, Module, and ATM Interface from the lists displayed at the left of the window.

Configuring an ATM Interface

To configure an ATM Interface, follow these steps:
Open the ATM Interface Configuration window. See
Step 1
Window" section on page 8-6
Choose a Chassis, Module, and ATM Interface from the lists displayed at the left of the window.
Step 2
OL-4455-01
ATM Interface Configuration Window—Configuration 1 Tab
Not applicable to Cisco 12000/10720 Router Manager
for further details.
"Viewing the ATM Interface Configuration
Cisco 12000/10700 v3.1.1 Router Manager User Guide
ATM Interface Configuration
8-7