Cisco 12000 User Manual page 37

Chapter 1 Overview
Cisco 12000/10720 Router Manager deployment—Eases deployment of large networks by enabling
•
template-based element configuration, operations, administration, and maintenance
–
–
Comprehensive fault management system—For chassis, line cards and interfaces
•
Configuration Backup/Restore using RME—Uses Resource Manager Essentials to back up and save
•
the running configuration of a device and its modules so that if a hardware failure occurs, you can
restore configuration
Configuration Editor—Uploads and saves the running configuration on a device after editing
•
Configuration operations—Performs in bulk to numerous Cisco 12000/10720 routers
•
• Cisco 12000/10720 Router Manager Management—Fault, Configuration, Accounting and
Performance (FCAP) Element Management of Cisco 12000 Series Routers using Cisco EMF
windows
Interface profiles—Enables you to apply the same parameters to a large number of objects at one
•
time
Layer 3 QoS support—Includes Committed Access Rate (CAR), Weighted Random Early Detection
•
(WRED), WRED ToFab and Modified Deficit Round Robin (MDRR)
Line cards and interfaces—Supports various line cards and interfaces, such as packet-over-SONET
•
(POS), Asynchronous Transfer Mode (ATM), Digital Signal 3 (DS3), Dynamic Packet Transport
(DPT), Spatial Reuse Protocol (SRP) and Gigabit and Fast Ethernet
Cisco IOS releases—Easily downloads new software releases from Cisco 12000/10720 Router
•
Manager onto devices using RME
ATM Connections Management—Uploads existing PVCs and associated QoS profiles from any
•
device into the Cisco 12000/10720 Router Manager and also manual deployment and management
of PVCs and SVCs
• Subchassis discovery—Determines the physical chassis contents, such as line cards and interfaces
Rediscover Line Cards after online insertion or removal (OIR)
•
BGP and OSPF Protocols Management—Configuration and Fault Management for BGP and OSPF
•
routing protocols and uploading BGP Address Family configurations
Route Processor Redundancy (GRP and PRP) support for chassis management
•
Complete support for IP Routing, TCP and UDP Status Management
•
MPLS Management—Fault Management and Performance Management for MPLS Interfaces and
•
Sub-Interfaces, Fault Management for LDP Entities and MPLS Tunnels, Configuring MPLS and
VRF Traps
VRF Management—Configuration of VRFs in the EM. Creation of VRFs in the device through EM
•
and Association of VRFs to Interfaces. Fault Management for VRFs
VLAN Management—Configuration and performance monitoring of the VLAN sub-interfaces
•
VLAN Synchronization—Uploads the existing VLAN information from the network into Cisco
•
12000/10720 Router Manager
OL-4455-01
Pre-deployment of chassis, GRP and line cards
AutoDiscovery—Automatically discovers existing Cisco 12000/10720 routers
Key Features of the Cisco 12000/10720 Router Manager Software
Cisco 12000/10700 v3.1.1 Router Manager User Guide
1-3