Module Performance Window-Detailed Description; Cpu Usage; Performance Logging - Cisco 12000 User Manual

Chapter 5 Managing Modules
To Start/Stop performance logging for a selected module, proceed as follows:
Step 1 Open the Module Performance window. See
page 5-10
Step 2 Choose a Chassis and Module(s) from the list boxes displayed at the left of the window. The
performance information for the selected GRP module is displayed.
Note
Click Start to begin performance logging for the selected module. Click Stop to stop performance
Step 3
logging for the selected module.
Launch the Performance Manager application to view the historical performance information for the
Step 4
selected module. See
information on how to use the Performance Manager application.
Module Performance Window—Detailed Description
The Module Performance window (see
Performance tab has two areas: CPU Usage and Performance Logging.

CPU Usage

The CPU Usage area displays the following fields:
•
•
•

Performance Logging

The Performance Logging area allows you to start or stop performance logging.
•
•
OL-4455-01
for further details.
You can select multiple Modules from the Module object selector list. Selecting multiple
modules allows you to start/stop performance logging for all of the selected modules
simultaneously. You can choose multiple modules in a list by holding down the Shift key and
then selecting the first and last module in the list. You can choose multiple individual modules
by holding down the Ctrl key and clicking on the individual modules.
Chapter 20, "Performance Management and Historical Data,"
CPU Busy%—Displays the percentage of CPU put to use for the selected GRP module.
Average (1 min)—Displays the percentage of CPU being utilized averaged over a one minute period
for the selected GRP module.
Average (5 min)—Displays the percentage of CPU being utilized averaged over five minute period
for the selected GRP module.
Start—Click Start to enable performance logging for the selected GRP module. Enabling
performance logging allows performance data to be gathered for the selected module. Performance
polling occurs every 15 minutes. Performance data is then gathered and stored for historical review.
Current performance data can be viewed in the performance windows, or you can view historical
performance data in Performance Manager.
Stop—Click Stop to stop all performance logging on the selected module. Disabling performance
logging stops performance data from being gathered for the selected GRP module.
"Viewing the Module Performance Window" section on
Figure 5-5 on page 5-10) displays a single Performance tab. The
Cisco 12000/10700 v3.1.1 Router Manager User Guide
Module Performance
for further
5-11