Aps Interface Configuration - Cisco 12000 User Manual

APS Interface Configuration

B2 BER Threshold Crossing Alarm (TCA)—Set threshold limits for the system to prompt appropriate
B2 BER TCA threshold alarm messages. The field beside this value displays the threshold for the B2
BER TCA.
B3 BER Threshold Crossing Alarm (TCA)—Set threshold limits for the system to prompt appropriate
B3 BER TCA threshold alarm messages. The field beside this value displays the threshold for the B3
BER TCA.
Signal Degrade BER—Set threshold limits for the system to prompt appropriate signal degrade BER
threshold alarm messages. The field beside this value displays the threshold for the signal degrade BER.
Signal Fail BER—Set threshold limits for the system to prompt appropriate signal fail BER threshold
alarm messages. The field beside this value displays the threshold for the signal fail BER.
Alarm Reporting
The Alarm Reporting area contains the following fields:
Path Remote Defect Indication Errors—Enable or disable the path remote defect indication errors alarm
messages.
Line Remote Defect Indication Errors—Enable or disable the line remote defect indication errors alarm
messages.
Line Alarm Indication Signal Errors—Enable or disable the line alarm indication signal errors alarm
messages.
Receive Data Out of Lock Errors—Enable or disable the Receive data output of lock errors alarm
messages.
Path Alarm Indication Signal Errors—Enable or disable the path alarm indication signal errors alarm
messages.
Section Loss of Signal Errors—Enable or disable the section loss of signal errors alarm messages.
LAIS on Interface Shutdown—Enable or disable the LAIS on interface shutdown alarm messages.
Section Loss of Frame Errors—Enable or disable the section loss of frame errors alarm messages.
Path Loss of Pointer Errors—Enable or disable the path loss of pointer errors alarm messages.
APS Interface Configuration
The APS Interface Configuration window allows you to configure APS for a POS Interface. APS
Configuration allows you to configure APS (Automatic Protection Switching)
It is recommended that only a system administrator have access to the APS Configuration
Note
window.
The APS Interface Configuration section covers the following areas:
•
•
Cisco 12000/10700 v3.1.1 Router Manager User Guide
8-18
Viewing the APS Configuration Window
APS Configuration Window—Detailed Description
Chapter 8 Interface Configuration
OL-4455-01