Chassis Configuration
The Action Report window (see
was successful or not.
Click Close to close the Action Report window.
Step 4
Stopping Global Performance Logging
Note
Performance logging can also be stopped on a per module (GRP) or physical interface
basis. For details on how to stop performance logging for a selected module (GRP), see
"Module Performance" section on page
logging for a selected physical interface (such as Ethernet, ATM, or DS-3), see
Performance Logging for a Selected Interface" section on page
To stop global performance logging for a selected chassis, proceed as follows:
Step 1
Open the Chassis Configuration window.
page 4-7
Step 2
Select the relevant Chassis from the list displayed at the left of the window.
Step 3
Click Stop to stop global performance logging for the selected chassis. An Action Report window
appears:
Figure 4-5
The Action Report window (see
was successful or not.
Step 4
Click Close to close the Action Report window.
Cisco 12000/10700 v3.1.1 Router Manager User Guide
4-10
Figure
for further details.
Action Report Window
Figure
4-4) informs you whether the performance logging "on" action
5-9. For details on how to stop performance
10-5.
See"Viewing the Chassis Configuration Window" section on
4-5) informs you whether the performance logging "off" action
Chapter 4
Managing Chassis
"Starting
OL-4455-01