Bgp Address Family-Redistribute Configuration - Cisco 12000 User Manual

BGP Address Family Configuration
BGP Address Family—Redistribute Configuration
The BGP Address Family - Redistribute Configuration window allows the user to add or remove
redistribute configurations for BGP address families. To configure the Redistribute protocol for an
address family, proceed as follows:
Open the BGP Address-Family Configuration window. See
Step 1
Address-Family Configuration Window" section on page 14-27
AF—Redistribute Tab.
Choose a chassis and the address family from the left side of the window.
Step 2
Note
Click on the Add/Remove AF Redistribute button to open the BGP Address Family - Redistribute
Step 3
Configuration.
Figure 14-26 BGP Address Family—Redistribute Configuration Window
Choose the chassis from the Chassis list and the address family from the Address Family list, for which
Step 4
you want to configure the Redistribution protocol.
Edit the fields displayed in the window, as required.
Step 5
Cisco 12000/10700 v3.1.1 Router Manager User Guide
14-40
You can choose multiple chassis and address families (from the list provided at the left side of
the window) which allows you to launch the BGP Address Family - Redistribute Configuration
window for the selected chassis.
Chapter 14
"Viewing the AF-General Tab on the BGP
for further details. Click on the
Routing
OL-4455-01