Fault Management For Mpls Lsr Interfaces; Mpls Interface Status; Viewing The Mpls Interface Status Window - Cisco 12000 User Manual

Fault Management for MPLS LSR Interfaces

Fault Management for MPLS LSR Interfaces
This section describes Fault Management for MPLS LSR interfaces. This section provides the following
information:
•
•

MPLS Interface Status

The MPLS Interface Status window displays information about MPLS configuration and capability for
the interfaces on a managed chassis (12000 Series and Cisco 10720). For any interfaces that have MPLS
configured, that is, having an MPLS layer active, their current configuration is displayed in the MPLS
Interface Status window. The MPLS Interface Status window can also be used to verify if MPLS is
enabled on the selected interface, or if sufficient interface buffer space is available.
You can view the MPLS Sub-interface status using the MPLS Interface Information window (which can
Note
be launched from the chassis level). See the
further details.
The MPLS Interface Status section covers the following:
•
•

Viewing the MPLS Interface Status Window

To view the MPLS Interface Status window, proceed as follows:
Right click on an appropriate object and choose Cisco 12000/10720 Manager> Fault> Interface>
Step 1
MPLS> Status. See
MPLS Interface Status window. The MPLS Interface Status window appears, with the Interface Setup
tab displayed.
Cisco 12000/10700 v3.1.1 Router Manager User Guide
15-6
"MPLS Interface Status" section on page 15-6
"MPLS Interface Information" section on page 15-8
Viewing the MPLS Interface Status Window
MPLS Interface Status Window—Detailed Description
Table 15-1 on page 15-3
"MPLS Interface Information" section on page 15-8
for information on which objects allow you to launch the
Chapter 15 MPLS Management
for
OL-4455-01