Cisco 12000 User Manual page 184

Creating an ATM Interface Profile
Figure 7-2 ATM Interface Configuration Profile Window (Configuration (1) Tab)
See
further information on the parameters displayed in this window.
Click Create Profile. A Prompt window appears (see
Step 2
profile.
Note
Cisco 12000/10700 v3.1.1 Router Manager User Guide
7-4
"ATM Interface Configuration Profile Window—Detailed Description" section on page 7-7
Each profile must have a unique name. Do not insert spaces into a profile name.
When you choose a profile name, it is recommended to use a naming convention
that describes the profile type. For example, an ATM profile might be called ATM1.
Not applicable for Cisco 12000/10720 Router Manager
Figure
Chapter 7
7-3) for you to enter a name for the new
Interface Profiles
for
OL-4455-01