Cisco 12000 User Manual page 486

Chapter 15 MPLS Management
Fault Management for MPLS LDP
Figure 15-16 MPLS LDP Peer Status Window—Sessions Tab
LDP Sessions
The LDP Session area displays a table. An entry in this table represents information on a single session
between an LDP Entity and LDP Peer. The information contained in a row is read-only.
The LDP Sessions table displays the following information:
Local LDP Id—Displays the LDP identifier.
Index—This index is used as a secondary index to uniquely identify this row.
Peer LDP Id—The LDP identifier of this LDP Peer.
Session State—The current state of the session.
Protocol Version—The version of the LDP protocol which this session is using. This is the version of
the LDP protocol which has been negotiated during session initialization.
Keep Alive Hold Time Remaining—The keep alive hold time remaining for this session.
Max PDU Length—The value of maximum allowable length for LDP PDUs for this session. This value
may have been negotiated during the Session Initialization.
Discontinuity Time—The value of sysUpTime on the most recent occasion at which any one or more of
this session's counters suffered a discontinuity.
Cisco 12000/10700 v3.1.1 Router Manager User Guide
15-30
OL-4455-01