Action; Viewing The Neighbor Tab On The Bgp Configuration Window - Cisco 12000 User Manual

BGP Configuration
Network Address—The is used to configure the IP address of a network to be advertised through BGP.
Network Mask—This is used to configure the subnet mask of the network to be advertised

Action

Add Network Entry—Clicking on the Add Network Entry button, adds the network entry on the device.
Thus, the user is able to add the networks associated with the BGP routing process.
Remove Network Entry—Clicking on the Remove Network Entry button, removes the network entry
from the device. Thus, the user is able to remove the networks associated with the BGP routing process.

Viewing the Neighbor Tab on the BGP Configuration Window

The Neighbor tab displays the connection related information for the BGP Neighbors. Each entry
corresponds to a BGP Neighbor. The user can add or remove the neighbor configurations on the device.
To view the Neighbor tab on the BGP Configuration window for a chassis, proceed as follows:
Step 1 Right click on the chassis object and choose Configuration>BGP>BGP Configuration. See
on page 14-2
Step 2 Click on the Neighbor tab.
Figure 14-7 BGP Configuration Window—Neighbor Tab
Choose the chassis from the left side of the window.
Step 3
Cisco 12000/10700 v3.1.1 Router Manager User Guide
14-12
for information on which objects allow you to launch the BGP Configuration window.
Chapter 14 Routing
Table 14-1
OL-4455-01