Wred Rx Configuration; Associating A Tofab Policy To A Line Card - Cisco 12000 User Manual

WRED Rx Configuration

WRED Rx Configuration
The WRED Rx Configuration section covers the following areas:
•
•
•
•

Associating a ToFab Policy to a Line card

To associate a ToFab policy to a line card, proceed as follows:
Step 1 Launch the Map Viewer, and choose the Layer3QoSView. Right click on the WRED-MDRR object and
choose Cisco 12000/10720 Manager>Configuration>ToFab>WRED Rx Configuration from a
relevant object icon to launch the WRED Rx Configuration window. Refer
information on which objects allow you to launch the WRED Rx Configuration window.
Figure 11-16 WRED Rx Configuration
Cisco 12000/10700 v3.1.1 Router Manager User Guide
11-36
Associating a ToFab Policy to a Line card
Disassociating a ToFab Policy from a Line card
Changing the Association of a ToFab Policy
WRED Rx Configuration Window—Detailed Description
Chapter 11 Layer 3 QoS
Table 11-1 on page 11-2 for
OL-4455-01