Adding A Working Interface; Removing A Working Interface; Adding A Protected Interface; Removing A Protected Interface - Cisco 12000 User Manual

APS Interface Configuration

Adding a Working Interface

To add a working interface, proceed as follows:
Choose a Chassis, Module, and POS Interface from the list boxes at the left of the window.
Step 1
Click Working.
Step 2
Step 3 Enter appropriate text in the Authentication and Group fields (for details on these fields, see
Configuration Window—Detailed Description" section on page
Step 4 Click Save.

Removing a Working Interface

To remove a working interface, proceed as follows:
Choose a Chassis, Module, and POS Interface from the list boxes displayed at the left of the window.
Step 1
The Working button for the selected interface should already be selected. Click Working to deactivate.
Step 2
Step 3 Click Save.

Adding a Protected Interface

To add a protected interface, proceed as follows:
Step 1 Choose a Chassis, Module, and POS Interface from the list boxes displayed at the left of the window.
Step 2 Click Protect.
Step 3 Enter appropriate text in all fields (for details on these fields, see
Window—Detailed Description" section on page
Step 4 Click Save.

Removing a Protected Interface

To remove a protected interface, proceed as follows:
Step 1 Choose a Chassis, Module, and POS Interface from the list boxes displayed at the left of the window.
Step 2 The Protect button for the selected interface should already be selected. Click Protect to deactivate.
Step 3 Click Save.
Cisco 12000/10700 v3.1.1 Router Manager User Guide
8-20
Chapter 8
8-21).
"APS Configuration
8-21).
Interface Configuration
"APS
OL-4455-01