Version; Trap Generation; Chassis Inventory; Viewing The Chassis Inventory Window - Cisco 12000 User Manual

Chapter 4 Managing Chassis

Version

Displays the SNMP version.
SNMP Version—Allows you to choose the SNMP version. Note that Cisco 12000/10720 Router
Manager release 3.0 does not support SNMPv3.

Trap Generation

Enable—Click Enable to enable trap generation for the selected chassis. Traps generated by the selected
chassis are sent to Cisco 12000/10720 Router Manager which is configured in the Cisco 12000 Series
Router device.
Disable—Click Disable to disable trap generation for the selected chassis. No traps will be generated
by the selected chassis.

Chassis Inventory

The Chassis Inventory window displays general inventory information, it is a read-only window (you
cannot configure any fields in this window).
The Chassis Inventory section covers the following areas:
•
•

Viewing the Chassis Inventory Window

To view the Chassis Inventory window, proceed as follows:
Right click on the chassis object and select the Accounting>Chassis Inventory option. See
Step 1
on page 4-2
Chassis Inventory window appears, with the General tab displayed.
OL-4455-01
Viewing the Chassis Inventory Window
Chassis Inventory Window—Detailed Description
for information on which objects allow you to launch the SNMP Management window. The
Cisco 12000/10700 v3.1.1 Router Manager User Guide
Chassis Inventory
Table 4-1
4-17