Cisco 12000 User Manual page 185

Chapter 7 Interface Profiles
Figure 7-3
Step 3 Enter a name for the new profile in the Enter profile name data entry box.
Step 4 Click Ok. The ATM Interface Configuration Profile window reappears with the new profile name
displayed in the ATM Profile list at the left of the window.
Note
Step 5 Configure the parameters displayed in the ATM Configuration and ILMI Configuration areas, as
required.
Note
Note
Choose File > Save to save the parameters you have selected for your profile.
Step 6
Choose File > Close to close the window.
Step 7
Note
OL-4455-01
Prompt Window
Choose the Copy and Copy Page Configuration options in the Edit menu to cut
and paste between different profiles. This is useful when you wish to copy
information from one profile to the next.
You can apply an existing profile to a new profile to save time when configuring
new profiles. Choose the Apply Profile option from the Edit menu and then choose
the existing profile you wish to apply from the profiles listed. The configuration
settings are copied from the existing profile to the new profile. The settings copied
appear in blue.
The parameters displayed in the Configuration (2) tab are not applicable to
Cisco 12000/10720 Router Manager.
You have now created a profile for the ATM Interface. Proceed to the
and Commissioning a Generic Interface" section on page 8-4
applying the profile and configuring the interface.
Creating an ATM Interface Profile
for details on
Cisco 12000/10700 v3.1.1 Router Manager User Guide
"Configuring
7-5