Document Organization - Cisco 12000 User Manual

Document Organization

Document Organization
This guide is organized as follows:
Table 1
Chapter Number
Chapter 1
Chapter 2
Chapter 3
Chapter 4
Chapter 5
Chapter 6
Chapter 7
Chapter 8
Chapter 9
Chapter 10
Chapter 11
Chapter 12
Cisco 12000/10700 v3.1.1 Router Manager User Guide
xxvi
Document Organization
Chapter Title
Overview
Concepts
Getting Started
Managing Chassis
Managing Modules
Managing Interfaces
Interface Profiles
Interface
Configuration
Interface Status
Interface
Performance
Layer 3 QoS
Managing ATM
Connections
Content
This chapter provides a basic overview of the
Cisco 12000/10720 Routers and the Cisco 12000/10720
Router Manager application.
This chapter describes Cisco 12000/10720 Router
Manager basic concepts.
This chapter describes the typical tasks you should
complete to get started using the Cisco 12000/10720
Router Manager application.
This chapter describes the various management tasks that
can be performed on the chassis to be managed using the
Cisco 12000/10720 Router Manager application.
This chapter describes the management functions
available on Gigabit Route Processors (GRPs), line cards,
and supporting modules.
This chapter describes the various management tasks that
can be performed on the interfaces of the Cisco devices
being managed using the Cisco 12000/10720 Router
Manager application.
This chapter describes how to create interface profiles
using the Cisco 12000/10720 Router Manager
application.
This chapter describes how to configure or set up
interfaces associated with each line card.
This chapter describes how to view appropriate status
information for each of the interfaces on the
Cisco 12000/10720 Routers you are managing.
This chapter describes how to view appropriate
performance information for each of the interfaces on the
Cisco 12000/10720 Routers you are managing.
This chapter describes how to create and configure Layer
3 QoS (Quality of Service) Committed Access Rate
(CAR), Weighted Random Early Detection (WRED)
policies and To-Fabric (ToFab) policies.
This chapter describes the different types of ATM
connections supported by the Cisco 12000/10720 Router
Manager application and then describes how to create, set
up and manage ATM connections. Cisco 10720 routers do
not support ATM connections.
About This Guide
OL-4455-01