Prerequisites For Configuring Ancp On Cisco Asr 9000 Series Routers; Restrictions For Configuring Ancp On Cisco Asr 9000 Series Routers; Information About Configuring Ancp On Cisco Asr 9000 Series Routers; Ancp Adjacencies - Cisco ASR 9000 Series Service Configuration Manual

Aggregation services router modular quality
Hide thumbs Also See for ASR 9000 Series:
Table of Contents

Advertisement

Prerequisites for Configuring ANCP on Cisco ASR 9000 Series Routers

Prerequisites for Configuring ANCP on Cisco ASR 9000 Series
Routers
The following prerequisite is required for configuring ANCP on your network:
You must be in a user group associated with a task group that includes the proper task IDs. The command
reference guides include the task IDs required for each command. If you suspect user group assignment
is preventing you from using a command, contact your AAA administrator for assistance.
Restrictions for Configuring ANCP on Cisco ASR 9000 Series
Routers
The following restrictions apply when configuring ANCP on your network:
Information About Configuring ANCP on Cisco ASR 9000 Series
Routers
To implement ANCP, you must understand the following concepts:

ANCP Adjacencies

The ANCP server accepts TCP connections from access nodes. An ANCP neighbor is any access node
that establishes an adjacency with an ANCP server. ANCP is configured globally, and as long as it is
IP-enabled, there is no restriction on whether ANCP messages are received on the physical or logical
interface.
Cisco ASR 9000 Series Aggregation Services Router Modular Quality of Service Configuration Guide
QC-90
Only Rate Adaptive Mode is supported in Cisco IOS XR Release 3.7.2.
VPN routing and forwarding (VRF) awareness is not supported in Cisco IOS XR Release 3.7.2. All
IP interfaces receiving ANCP traffic should be in default VRF.
ANCP over IPv6 is not supported for Cisco IOS XR Release 3.7.2.
Only VLAN subinterfaces over Ethernet and Ethernet bundle ports can be mapped to AN ports using
ANCP.
ANCP Adjacencies, page 90
Neighbor Adjacency Timing, page 91
ANCP Messages, page 91
Port Mapping, page 91
Rate Adjustment, page 92
Prioritization of ANCP Traffic, page 92
Process Restart, page 92
ANCP and QoS Interaction, page 92
ANCP over Multi-Chassis Link Aggregation, page 93
Configuring Access Node Control Protocol on Cisco ASR 9000 Series Routers
OL-23108-02

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ASR 9000 Series and is the answer not in the manual?

Table of Contents

Save PDF