Vrf Object Status; Viewing The Vrf Object Status Window - Cisco 12000 User Manual

VRF Fault Management

VRF Object Status

The VRF Object Status window displays information specifically for the VRF object from which the
window was launched. This window displays values only for VRFs created in the device through the EM.
The VRF Status, VPN Status and Interface VRF Status windows at chassis level display similar
Note
information for all the VRFs on that chassis.
The VRF Object Status section contains the following areas:
•
•

Viewing the VRF Object Status Window

To view the VRF Object Status window, proceed as follows:
Right click on the VRF object and choose Cisco 12000/10720 Manager> Fault> Chassis>
Step 1
MPLS>VRF Object Status. See
to launch the VRF Object Status window. The VRF Object Status window appears.
Figure 16-18 VRF Object Status Window
Cisco 12000/10700 v3.1.1 Router Manager User Guide
16-26
Viewing the VRF Object Status Window
VRF Object Status Window—Detailed Description
Table 15-1 on page 15-3 for information on which objects allow you
Chapter 16 MPLS VRF Management
OL-4455-01