Vrf Object Status Window-Detailed Description; General Tab - Cisco 12000 User Manual

Chapter 16 MPLS VRF Management
Choose a VRF from the list displayed at the left of the window. For further information on the fields
Step 2
displayed in this window, see the
page
VRF Object Status Window—Detailed Description
The VRF Object Status window displays five tabs: General, Routes, Route Targets, Interface Association
and Performance.

General Tab

The General tab (see
General
The General area displays the following information:
Oper Status—Denotes whether a VRF is operational or not. A VRF is up when at least one interface
associated with the VRF, which interface operation status is up. A VRF is down when:
•
•
Mid Route Threshold—Denotes mid-level water marker for the number of routes which this VRF may
hold.
Storage Type—Displays the storage type for this entry.
VRF Description—Displays the description of this VRF.
Associated Interfaces—Total number of interfaces connected to this VRF (independent of interface
operation status type).
No. of Active Interfaces—The number of VRFs which are active on this node. Total number of interfaces
connected to this VRF with interface operation status = up.
Route Distinguisher—Displays the route distinguisher for this VRF.
Creation Time—Displays the The time at which this VRF entry was created.
High Route Threshold—Displays high-level water marker for the number of routes which this VRF may
hold.
Conf Last Changed On—Displays the value of sysUpTime at the time of the last change of this table
entry, which includes changes of VRF parameters defined in this table or addition or deletion of
interfaces associated with this VRF.
Max No. of Routes—Displays the maximum number of routes which this VRF is configured to hold.
Security
The VPN VRF Details area displays the following information:
No. of illegally received labels—Indicates the number of illegally received labels on this VPN/VRF.
Notification issued after no. of illegal labels—The number of illegally received labels above which this
notification is issued.
OL-4455-01
16-27.
Figure 16-18) displays VRF details in two areas, General and Security.
There does not exist at least one interface whose interface operation status is up.
There are no interfaces associated with the VRF.
"VRF Object Status Window—Detailed Description" section on
Cisco 12000/10700 v3.1.1 Router Manager User Guide
VRF Fault Management
16-27