Configuration
Viewing ATM Physical Port Configurations?
Q.
A.
Cisco 12000/10700 v3.1.1 Router Manager User Guide
21-6
How do I view the ATM physical port configurations? It looks like ATM Configuration GUIs are for
configurations only.
To view what is configured in the ATM physical port, use all the configuration windows provided
by the Cisco 12000/10720 Router Manager. For IP (Layer3) information use the IP Configuration
Window. For Interface Status: Use the Interface Configuration window, etc.
Configuration windows are technology-specific. For example, an ATM interface supports three
configurable technologies: Generic, ATM, and IP. Therefore, if you want to view or modify the
configuration of an ATM interface you might need to view three windows as follows:
Generic Interface Configuration window
–
ATM Interface Configuration window
–
IP Interface Configuration window
–
See
http://www.cisco.com/en/US/products/sw/netmgtsw/ps156/products_user_guide_chapter09186a00
8017824a.html
for more details.
Chapter 21
Troubleshooting and FAQs
OL-4455-01