Bgp Details Tab-Detailed Description; Bgp General - Cisco 12000 User Manual

BGP Configuration
Figure 14-1 BGP Configuration Window—BGP Details
Choose the chassis from the left side of the window.
Step 2
BGP Details Tab—Detailed Description
The BGP-Details tab displays two areas: BGP General and BGP Information

BGP General

Local Autonomous System—The id of the BGP process running in the device. If the value is 0 it means
no BGP process is running on the device.
Actions
Enable—The Enable action button is active when there is no BGP running on the device. Clicking Enable
action button opens the BGP Enable window through which the user can create a new BGP process in
the device. For more details on enabling BGP on a chassis, see
page
Disable—The Disable action button is active when there is a BGP process running in the device.
Clicking Disable action button removes the BGP process running in the device. For more details on
disabling BGP, see
Cisco 12000/10700 v3.1.1 Router Manager User Guide
14-4
5.
"Disabling BGP on a Chassis" section on page
Chapter 14
"Enabling BGP on a Chassis" section on
8.
Routing
OL-4455-01