SRP Interface Side Configuration
SRP Interface Side Configuration
The SRP Side Configuration window allows you to configure a selected SRP Side. The SRP Side
Configuration section covers the following areas:
•
•
•
Viewing the SRP Interface Side Configuration Attributes
To view the SRP Side Configuration window, proceed as follows:
Step 1
Choose the Cisco 12000/10720 Manager>Configuration>SRP>Side>Configuration option from a
SRP Side object icon to launch the SRP Side Configuration window. Refer to
information on which objects allow you to launch the SRP Interface Side Configuration window.
Figure 8-9
Choose a Chassis, Module, SRP Interface and SRP Side from the lists displayed at the left of the
Step 2
window to view the configuration details of the SRP Side.
Cisco 12000/10700 v3.1.1 Router Manager User Guide
8-24
Viewing the SRP Interface Side Configuration Attributes
Configuring a SRP Side
SRP Interface Side Configuration Window—Detailed Description
SRP Interface Side Configuration Window
Chapter 8
Interface Configuration
Table 8-2 on page 8-2
OL-4455-01
for