Ip Extended Tab - Cisco 12000 User Manual

Access List Configuration

IP Extended Tab

The IP Extended tab displays a single IP Extended area. The IP Extended area is further split into three
sub-areas: Dynamic List, Source, and Destination.
Figure 11-6 Access List Configuration Window—IP Extended Tab
IP Extended
The IP Extended area contains two fields:
Access Action—Action to be taken if the conditions are matched. Possible actions are deny and permit.
Protocol Name—Name or number of an IP protocol. Valid protocol number values are 0 to 255. Valid
protocol names are as follows:
Table 11-2 Valid Protocol Names
Valid Protocol Names
ahp
eigrp
gre
icmp
igmp
igrp
ip
esp
Cisco 12000/10700 v3.1.1 Router Manager User Guide
11-16
ipinip
nos
ospf
pcp
pim
tcp
udp
Chapter 11 Layer 3 QoS
OL-4455-01