Physical Objects - Cisco 12000 User Manual

Cisco 12000/10720 Router Manager Objects and Interfaces

Physical Objects

Table 2-1
functions that can be performed on each object.
Table 2-1
Cisco 12000/10720 Router Manager Physical Object
Chassis—The hardware frame of the Cisco 12000/10720 Router,
which houses all subchassis objects (modules).
GRP (Gigabit Route Processor)—There can be up to two GRPs in
a chassis. The primary GRP is the CPU or "brains" of the router.
The secondary GRP is redundant.
Line Cards—There are various types of line cards within a chassis
(for example, ATM, Ethernet, SRP, POS, E3, DS3 and Modular
Ethernet). Each of these line cards holds a given number of
physical interfaces (ports).
Physical Interfaces—Each line card has at least one, if not
multiple, physical interfaces (ports). The type of physical interface
is equivalent to the type of line card the interface resides on. Each
physical interface can support multiple technologies (for details,
see
The line card type determines what specific technologies are
supported by an interface.
Supporting Modules—Additional subchassis cards and modules:
the switch fabric card (SFC), clock scheduler card (CSC), AC or
DC power supply module, blower module, and fan tray module.
Note The Cisco 10720 chassis does not support the Configuration Editor.
The physical objects and interfaces displayed in
•
•
Cisco 12000/10700 v3.1.1 Router Manager User Guide
2-2
lists all physical objects created in Cisco 12000/10720 Router Manager and the management
Physical Objects and Management Functions
"Physical Interfaces and Technologies" section on page
The chassis contains the GRPs, supporting modules, and all line cards
The line cards contain the physical interfaces.
Management Functions
Command Log
Configuration
Configuration Backup/Restore
Configuration Editor
Fault Management
Initiate Telnet Service
Inventory
IOS Image Download
Launch Web Console
Management Information
SNMP Management
System Log
APS Status
RPR Configuration
RPR Status
Configuration
Fault Management
Inventory
Performance
Configuration
Fault Management
Inventory
Profile
Configuration
Fault Management
Performance
2-5) Status
Configuration
Fault Management
Inventory
Table 2-1 are traced as follows:
Chapter 2 Concepts
OL-4455-01