Viewing The Generic Interface Configuration Window; Configuring And Commissioning A Generic Interface - Cisco 12000 User Manual

Generic Interface Configuration

Viewing the Generic Interface Configuration Window

To view the Interface Configuration window, proceed as follows:
Step 1 Right click on the interface object and select the Cisco 12000/10720 Manager>Configuration>
Generic>Configuration option. See
to launch the Interface Configuration window. The Interface Configuration window appears with the
Configuration tab displayed.
Figure 8-1
Step 2 Choose a Chassis, Module and Interface from the list boxes displayed at the left of the window.

Configuring and Commissioning a Generic Interface

Commissioning/decommissioning an interface is only available from the Generic Interface
Note
Configuration window.
Cisco 12000/10700 v3.1.1 Router Manager User Guide
8-4
Table 8-1 on page 8-2
Interface Configuration Window—Configuration Tab
Chapter 8 Interface Configuration
for information on which objects allow you
OL-4455-01