Module Fault Management Window-Detailed Description; Module Availability - Cisco 12000 User Manual

Module Fault Management
Figure 5-4
Choose a Chassis and Module from the list boxes at the left of the window. The fault management
Step 2
information for the selected module appears. For detailed information on the areas within this tab, see
"Module Fault Management Window—Detailed Description" section on page
Module Fault Management Window—Detailed Description
The Module Fault Management window displays a single Fault Management tab. The Fault Management
tab displays two areas: Module Availability and Cisco Contact Details.
The details related to the modules are available only if the module is in a managed state.
Note

Module Availability

The Module Availability area contains the following fields:
•
•
•
Cisco 12000/10700 v3.1.1 Router Manager User Guide
5-8
Module Fault Management Window
Up Time—Displays the time after the network portion of the system was last re-initialized for the
selected module.
Free Memory—Displays the memory space (in bytes) currently unused by the selected GRP module.
Last Restart Reason—Displays the reason for the system being re-initiated for the selected GRP
module.
Chapter 5 Managing Modules
5-8.
OL-4455-01