Cisco 12000 User Manual page 473

Chapter 15 MPLS Management
Performance Management for MPLS LSR Interfaces
Figure 15-8 MPLS Interface Performance Window—MPLS Performance Statistics Tab
Failed Label Lookups—Displays the number of labeled packets that have been received on this interface
and were discarded because there were no matching entries found for forwarding them.
Incoming Direction
The Incoming Direction area displays the following information:
In Labels Used—This value indicates the specific number of labels that are in use at this point in time
on this interface in the incoming direction.
In Discards—The number of inbound labeled packets, which were chosen to be discarded even though
no errors had been detected to prevent their being transmitted. One possible reason for discarding such
a labeled packet could be to free up buffer space.
In Packets—This variable reflects the number of labeled packets that have been received on this
interface.
Outgoing Direction
The Outgoing Direction area displays the following information:
Out Labels Used—Indicates the number of top-most labels in the outgoing label stacks that are in use at
this point in time on this interface.
Out Discards—The number of outbound labeled packets, which were chosen to be discarded even though
no errors had been detected to prevent their being transmitted. One possible reason for discarding such
a labeled packet could be to free up buffer space.
Cisco 12000/10700 v3.1.1 Router Manager User Guide
15-17
OL-4455-01