Editing An Existing Atm Interface Profile; Deleting An Existing Atm Interface Profile - Cisco 12000 User Manual

Creating an ATM Interface Profile

Editing an Existing ATM Interface Profile

To edit an existing ATM Interface profile, proceed as follows:
Step 1 Choose the Cisco 12000/10720 Manager>Configuration>ATM>Configuration Profile option from
an ATM interface object. See
the ATM Interface Configuration Profile window.
Step 2 Choose the profile you wish to edit from the list of existing profiles displayed in the ATM Interface list
at the left of the window (see
Edit the parameters displayed in the Configuration (1) tab, as required.
Step 3
Step 4 Choose File > Save to save the changes made to the service profile.
Step 5 Choose File > Close to close the window.

Deleting an Existing ATM Interface Profile

To delete an existing ATM Interface profile, proceed as follows:
Step 1 Choose the Cisco 12000/10720 Manager>Configuration>ATM>Configuration Profile option from
an ATM interface object. See
the ATM Interface Configuration Profile window.
Choose the Edit > Delete Profile. Choose the profile you wish to delete from the list displayed. A
Step 2
Deletion Prompt window appears (see
profile.
Figure 7-4
Step 3 Click Yes to delete the selected profile or click No to close the window without deleting the profile.
When a profile is deleted it disappears from the list of existing profiles displayed in the ATM Profile list
at the left of the window.
Cisco 12000/10700 v3.1.1 Router Manager User Guide
7-6
Table 7-2 on page 7-2
Figure 7-2).
Table 7-2 on page 7-2
Figure
Deletion Prompt Window
for information on which objects allow you to launch
for information on which objects allow you to launch
7-4) for you to confirm that you wish to delete the selected
Chapter 7 Interface Profiles
OL-4455-01