CAR Policy Configuration
Figure 11-1 CAR Policy Configuration Window
Step 2
Choose Create CAR Policy. A popup window appears asking for you to enter a name for the CAR
policy.
Step 3
Enter a name for the CAR policy you are about to create, then choose Ok.
A window appears, confirming if you were successful or not. The name of your new profile appears in
the list box at the left of the window.
Modify the configuration fields, as desired (see below for a detailed description of the fields within this
Step 4
window).
Step 5
Choose Save to save the changes.
Applying an Access List to a CAR Policy
Step 1
You can apply an access list to a selected CAR policy if desired (to create an access list, see
Configuration" section on page
Choose Yes in the Access List Choice area. Available access lists appear at the left of the window.
Step 2
Step 3
Choose the access list you want to apply.
Cisco 12000/10700 v3.1.1 Router Manager User Guide
11-8
11-10). To apply an access list, proceed as follows:
Chapter 11
Layer 3 QoS
"Access List
OL-4455-01