Interface Vrf Status Window-Detailed Description; Interface Vrf Association Tab; Vpn Status; Viewing The Vpn Status Window - Cisco 12000 User Manual

VRF Fault Management
Interface VRF Status Window—Detailed Description
The Interface VRF Status window provides information about every interface that is capable of
supporting MPLS/BGP VPNs. The Interface VRF Status window displays a single Interface VRF
Association tab.

Interface VRF Association Tab

The Interface VRF Association tab (see
and Association Status.
Interface VRF Association
The Interface VRF Association area displays the following information:
VRF Interface/Sub-Interface—Displays only those interfaces that are enabled for MPLS/BGP VPN. The
interfaces/sub-interfaces are listed alphabetically.
Association Status
The Association Status area displays the following information:
Label Edge Type—Either the providerEdge (PE) or customerEdge (CE).
Storage Type—Displays the storage type for this entry.
VPN Classification—Link participation: carrier-of-carrier or enterprise or as inter provider.
Route Distribution Protocol—Displays the route distribution protocol across the PE-CE link.
Associated VRF—Displays the name of the VRF associated with the selected interface.
Interface Status—Displays the operational status of the selected interface.

VPN Status

The VPN Status window displays VPN Status. The VPN Status section contains the following areas:
•
•

Viewing the VPN Status Window

To view the VPN Status window, proceed as follows:
Step 1 Right click on a chassis object and choose Fault>MPLS>VPN Status. See
information on which objects allow you to launch the VPN Status window. The VPN Status window
appears, with the General tab displayed.
Cisco 12000/10700 v3.1.1 Router Manager User Guide
16-20
Viewing the VPN Status Window
VPN Status Window—Detailed Description
Figure 16-13) displays two areas, Interface VRF Association
Chapter 16 MPLS VRF Management
Table 16-1 on page 16-2
OL-4455-01
for