Car Policy Apply; Applying A Car Policy To An Interface - Cisco 12000 User Manual

CAR Policy Apply

CAR Policy Apply
The CAR Policy Apply section covers the following areas:
•
•
•
•

Applying a CAR Policy to an Interface

To apply a CAR policy to an interface, proceed as follows:
Step 1 Choose Cisco 12000/10720 Manager>Configuration>Interface>QoS>CAR Policy Apply from a
relevant object icon (in the Map Viewer window or from an object pick list) to launch the CAR Policy
Apply window. See
CAR Policy Apply window.
Figure 11-7 CAR Policy Apply Window
Step 2 Choose a Chassis, Module, and IP Interface you want to apply the CAR policy to are selected in the
list boxes at the left of the window. You can choose multiple chassis, modules, or interfaces if required.
Step 3 Choose the policy you want to apply (in the Available Policies listbox), and choose the right facing arrow
to move that policy into the Required Order box.
Cisco 12000/10700 v3.1.1 Router Manager User Guide
11-18
Applying a CAR Policy to an Interface
Removing a CAR Policy from an Interface
Editing or Deleting a CAR Policy
CAR Policy Apply Window—Detailed Description
Table 11-1 on page 11-2 for information on which objects allow you to launch the
Chapter 11 Layer 3 QoS
OL-4455-01