Viewing The Af-General Tab On The Bgp Address-Family Configuration Window - Cisco 12000 User Manual

Chapter 14 Routing

Viewing the AF-General Tab on the BGP Address-Family Configuration Window

The AF-General tab displays the BGP address family parameters. The user can create, remove or modify
the BGP Address Family Parameters. To view the AF-General tab on the BGP Address Family
Configuration window for a chassis, proceed as follows:
Right click on the chassis object and choose Configuration>BGP>BGP Address-Family
Step 1
Configuration. See
BGP Address-Family Configuration window.
Note
Note
Figure 14-18 BGP Address-Family Configuration Window
Choose the Chassis and the Address Family List from the left side of the window.
Step 2
OL-4455-01
Table 14-1 on page 14-2
When the BGP Address-Family Configuration window is launched, the AF-General tab is
displayed by default.
The action buttons are greyed when there is no BGP configured on the device.
for information on which objects allow you to launch the
Cisco 12000/10700 v3.1.1 Router Manager User Guide
BGP Address Family Configuration
14-27