Vlan Performance Window-Detailed Description; Reparenting Vlans And Vlan Sub-Interfaces - Cisco 12000 User Manual

V3.1.1 router manager
Table of Contents

Advertisement

Chapter 13
Managing VLANs
VLAN Performance Window—Detailed Description
The VLAN Performance window (see
Performance tab. The VLAN Performance tab has a single tabular area with the following fields:
VLAN Id—Identifier for the VLAN object.
Packets transmitted—The number of packets transmitted by this VLAN.
Packets Received—The number of packets received by this VLAN.
Note
The performance data for the VLAN sub-interfaces can be viewed in the Generic Interface Performance
dialog. Refer

Reparenting VLANs and VLAN Sub-Interfaces

After the VLAN synchronization process is completed, all the VLAN objects and their corresponding
sub-interface objects are placed under a single domain called the DefaultDomain. Reparenting allows
you to relocate a VLAN object under a domain or a sub-interface object under a VLAN as per the
requirements.
It is strongly recommended that the user does not move any VLAN related objects out of VLANView.
Caution
This could result in unexpected behavior.
Reparenting is basically used to relocate the VLAN and sub-interface objects under different domains
after synchronization.
To reparent a sub-interface object under a VLAN, it is mandatory that the vlan id of the parent VLAN
Note
object should be identical. The VLAN object must be placed under a different domain.
For example: Say, you have deployed two domains, D1 and D2. D1 has a VLAN object V1 with
sub-interface E1 placed under it and D2 has a VLAN object V2. It will not be possible to place E1 from
domain D1 under V2 in domain D2 as the VLAN ids of the VLAN objects are different. But, if a VLAN
object is deployed in D2 having id as V1, it would be possible for you to place sub-interface object E1
under V1 in domainD2.
To reparent a VLAN object, proceed as follows:
Step 1
Right click on a VLAN object in the VLAN view and choose View Manipulation>Reparent
Object(s)... . The Reparent dialog can be launched from a VLAN or sub-interface object.
OL-4455-01
Figure 13-24 on page
"Generic Interface Performance" section on page 10-3
Reparenting VLANs and VLAN Sub-Interfaces
13-20) displays a single VLAN
for further information.
Cisco 12000/10700 v3.1.1 Router Manager User Guide
13-21

Advertisement

Table of Contents
loading

This manual is also suitable for:

1070012000/10720

Table of Contents