Management Information; Viewing The Management Information Window - Cisco 12000 User Manual

Chapter 4 Managing Chassis
Table 4-1 Launching the Chassis Management Windows (continued)
Cisco 12000/10720 Router
Manager Window/Task
Initiating a Telnet
Service
Configuration Editor
The Cisco 12000/10720 Router Manager Chassis Management windows cannot be opened
Note
when multiple objects are selected (the menu options to open the windows are grayed out).
Available menu options can be launched from a site object containing the required objects.

Management Information

The Management Information window allows you to perform the following functions:
•
•
•
It is strongly recommended that only a System Administrator should have access to the
Caution
Management Information window, because access passwords can be configured and
modified in this window.
The Management Information section covers the following areas:
•
•
•
•

Viewing the Management Information Window

To view the Management Information window, proceed as follows:
Right click on the chassis object and select the Configuration>Management Information option. See
Step 1
Table 4-1 on page 4-2
Information window. The Management Information window appears, with the Configuration tab
displayed.
OL-4455-01
Objects (that can be selected) to Open the
Window
Site Chassis Chassis Module
12000
10720
Series
No Yes Yes Yes
No Yes No No
Configure the chassis IP address fields
Set or change IOS CLI username and passwords
Set or change the system attributes
Viewing the Management Information Window
System Configuration
Entering or Changing IOS CLI Username and Passwords
Management Information Window—Detailed Description
for information on which objects allow you to launch the Management
Menu Options to Select to Open Window
Interface
Yes Technology Specific Tools>Initiate Telnet Service
No Technology Specific Tools>Open Configuration
Editor
Cisco 12000/10700 v3.1.1 Router Manager User Guide
Management Information
4-3