Cisco 12000 User Manual page 472

Chapter 15 MPLS Management
Performance Management for MPLS LSR Interfaces
In Unicast Packets—Displays the number of packets delivered by this sub-layer to a higher sub-layer,
which were not addressed to a multicast or broadcast address at this sub-layer.
Out Unicast Packets—Displays the total number of packets that higher level protocols requested be
transmitted and which were not addressed to a multicast or broadcast address at this sub-layer, including
those that were discarded or not sent.
High Speed Counters
Only the High Speed Counters (64bit counters) from the General Performance Statistics tab will be
Note
available for collection and not the 32bit counters. Data shown in Performance Statistics tab is also
available for collection.
The High Speed Counters area displays the following information:
In Octets (64 bit)—Displays the total number of 64 bit octets received by the MPLS layer on the selected
interface including framing characteristics.
Out Octets (64 bit)—Displays the total number of 64 bit octets transmitted by the MPLS layer from the
interface including framing characteristics.
In Unicast Packets (64 bit)—Displays the number of 64 bit packets delivered by this sub-layer to a higher
sub-layer, which were not addressed to a multicast or broadcast address at this sub-layer.
Out Unicast Packets (64 bit)—Displays the total number of 64 bit packets that higher level protocols
requested be transmitted and which were not addressed to a multicast or broadcast address at this
sub-layer, including those that were discarded or not sent.
MPLS Performance Statistics Tab
The MPLS Performance Statistics tab (see Figure 15-8) displays the Failed Label Lookups attribute and
Incoming Direction and Outgoing Direction areas.
Cisco 12000/10700 v3.1.1 Router Manager User Guide
15-16
OL-4455-01