Normal Policy; Cemf_Is_Master_After_First_Sync - Cisco 12000 User Manual

ATM Connection Synchronization
Table 12-3 DeviceIsMaster Policy (continued)
VCL in Cisco EMF
Present
Present
Present
Not Present
Not Present

Normal Policy

This setting specifies that the Cisco device is the reference point for PVC creations and deletions. Cisco
12000/10720 Router Manager will sync up to the device. If a connection is present on the Cisco device
but not in Cisco 12000/10720 Router Manager, it will create the connection. If a connection is absent on
the Cisco device but present in Cisco 12000/10720 Router Manager, it will delete the connection.
Table 12-4 Normal Policy
VCL in Cisco EMF
Present
Present
Present
Present
Not Present
Not Present

CEMF_is_Master_After_First_Sync

This setting specifies that Cisco 12000/10720 Router Manager is the reference point for PVC creations
and deletions, after the first synchronization. The device syncs up to the Cisco 12000/10720 Router
Manager for information about PVC settings. If the connection is present in Cisco 12000/10720 Router
Manager but not the Cisco device and the state of the VCL connection is Normal, Cisco 12000/10720
Router Manager creates the connection in the Cisco device. If the connection is absent in Cisco
12000/10720 Router Manager but present in the Cisco device, Cisco 12000/10720 Router Manager
deletes the connection from the Cisco device.
Table 12-5 CemfIsMasterAfterFirstSync Policy
VCL in Cisco EMF
Present
Present
Present
Present
Cisco 12000/10700 v3.1.1 Router Manager User Guide
12-6
VCL State VCL on Device
Decommission Not Present
Normal Present
Decommission Present
N/A Present
N/A Not Present
VCL State VCL on Device
Normal Not Present
Decommission Not Present
Normal Present
Decommission Present
N/A Present
N/A Not Present
VCL State VCL on Device
Normal Not Present
Decommission Not Present
Normal Present
Decommission Present
Chapter 12 Managing ATM Connections
Behavior
Remove from
Cisco EMF
Do not do anything
Change state to Normal
Create in Cisco EMF
N/A
Behavior
Change state to
decommission
Do not do anything
Do not do anything
Change state to Normal
Create in Cisco EMF
N/A
Behavior
Create in Device
Do not do anything
Do not do anything
Remove it from device
OL-4455-01