Chapter 17 Mpls Trap Management; Mpls Traps Supported By The C12000/10720 Router Manager - Cisco 12000 User Manual

MPLS Trap Management
This chapter describes MPLS traps that can be configured using the Cisco 12000/10720 Router Manager
application using the MPLS Trap Configuration window.
The MPLS Trap Configuration window allows you to enable/disable MPLS related Traps on a managed
Cisco 12000 Series Router or a 10720 Router. The MPLS based traps that can be configured through the
Cisco 12000/10720 Router Manager application are as follows:
•
•
•
Cisco 12000/10720 Router Manager is capable of receiving the above-mentioned traps and address as
alarms with a predefined severity against the respective chassis objects.
This chapter provides the following information:
•
•
•

MPLS Traps Supported by the C12000/10720 Router Manager

Table 17-1
information:
Table 17-1 MPLS Traps/Alarms Raised
Trap
LdpSessionUp
LdpSessionDown
OL-4455-01
LDP traps
VPN traps
Traffic engineering traps
MPLS Traps Supported by the C12000/10720 Router Manager
Enabling/Disabling Traps on the Device
MPLS CLI Troubleshooting Services
provides a lists of MPLS traps with the detailed description, severity and Clear correlation
Alarm Description
LDP Session Up between
<LdpEntityLdpId> <LdpEntityIndex>
<LdpPeerLdpId>
LDP Session Down between
<LdpEntityLdpId> <LdpEntityIndex>
<LdpPeerLdpId>
C H A P T E R
Severity Clears
Normal LdpSessionUp and
LdpSessionDown
Major LdpSessionDown
Cisco 12000/10700 v3.1.1 Router Manager User Guide
17
17-1