Connecting Or Disconnecting An Svc; Decommissioning Or Recommissioning An Svc; Svc Configuration Window-Detailed Description; Configuration - Cisco 12000 User Manual

SVC Configuration
Choose the Chassis, Module, Interface, and Connections (SVC) from the list boxes at the left of the
Step 2
window.
Enter the relevant values in the tab, using the drop-down lists and data entry boxes. For a detailed
description of the fields within this tab, see
section on page
Step 3 Click the Save icon to save the changes made.

Connecting or Disconnecting an SVC

Connecting an SVC creates the SVC on the device and makes it a real, working connection. The SVC is
also commissioned at this time, which allows you to manage configuration and status details.
Disconnecting an SVC disconnects the connection entirely from the device.
To connect or disconnect an SVC:
•
•

Decommissioning or Recommissioning an SVC

When you connect an SVC, it is automatically commissioned as well. Decommissioning does not
disconnect the SVC.
To decommission a connected SVC:
•
•
Once you have decommissioned a connected SVC, you might want to recommission it, which
re-establishes management on the connection. To recommission a decommissioned SVC, simply click
Connect.
SVC Configuration Window—Detailed Description
The ATM SVC Configuration window (see

Configuration

The Configuration tab contains four areas:
•
•
•
•
Cisco 12000/10700 v3.1.1 Router Manager User Guide
12-38
12-38.
Make sure that the SVC you want to connect or disconnect is selected in the list boxes at the left of
the window.
Click the Connect or Disconnect button in the Action area.
Make sure that the SVC you want to decommission is selected in the list boxes at the left of the
window.
Click Decommission in the Action area. The SVC is placed into the Decommissioned state.
SVC Parameters.
VC Parameters.
OAM Parameters.
Actions.
Chapter 12
"SVC Configuration Window—Detailed Description"
Figure 12-30) contains one tab: Configuration.
Managing ATM Connections
OL-4455-01