Rpr Configuration Window-Detailed Description; Configuration Tab - Cisco 12000 User Manual

Chapter 4 Managing Chassis
Figure 4-19 RPR Configuration Window
Choose a Chassis from the list displayed at the left side of the window. For further information on the
Step 2
fields displayed in this window, see
details.
RPR Configuration Window—Detailed Description
The RPR Configuration window displays two tabs: Configuration and Switch Over

Configuration Tab

Redundancy Mode—Displays and sets the redundancy mode of the selected chassis. The redundancy
mode can be RPR, RPR- Plus or SSO
Note If the mode of the RP changes, then the standby RP is reloaded.
Preferred RP—Displays and sets the value (either "Active Slot No" or "Standby Slot No") that
determines the active RP on the next reload.
OL-4455-01
RPR Configuration Window—Detailed Description
Cisco 12000/10700 v3.1.1 Router Manager User Guide
RPR Configuration
for further
4-39