Removing Brocade Netiron Xmr 3200 Router Dc Power Supplies296; Final Steps; Attaching A Management Station - Brocade Communications Systems MLX Series Installation Manual

4

Attaching a management station

Removing Brocade NetIron XMR 3200 router DC power supplies
Follow these steps to remove a 2400W DC power supply in a Brocade NetIron XMR 3200 router:
1. Ensure the main DC power breaker is OFF.
2. Use a #1 Phillips screwdriver to remove the screws that secures the safety cover, as shown in
3. Use a #2 Phillips screwdriver to remove the screws securing the power lugs. Refer to
4. Pull down on handle to remove power supply. Refer to
Follow these steps to remove a 3000W DC power supply in a Brocade NetIron XMR 3200 router:
1. Ensure the main DC power breaker is OFF.
2. Use a #1 Phillips screwdriver to remove the screw that secures the safety cover, as shown in
3. Pull down on the handle to remove the 3000W power supply. Refer to
4. Use a #2 Phillips screwdriver to remove the screws securing the power lugs. Refer to

Final steps

Follow these steps in the order listed to complete the installation:
•
•
•
Attaching a management station
You can manage your router in the following ways:
•
•
296
Figure 207 on page 293. Remove the safety cover.
Figure 208 on page 294.
Figure 207 on page 293.
Figure 208 on page 294.
"Attaching a management station"
"Activating the power source"
"Verifying proper operation"
Connect a PC or terminal to the console port on the management module. From this port, you
can assign an IP address to the management module and establish connections through
Telnet or SSH.
Connect the router to your existing management network and manage the router and other
network devices from a management station.
NOTE
The management network that you connect to through the 10/100 Ethernet port must be
separate and isolated from the network over which user packets are switched and routed. For
information about functionality on the management port, Refer to
management port functions"
Figure 205
on page 317.
Brocade MLX Series and NetIron XMR Hardware Installation Guide
on page 291.
Figure 205 on page 291.
"Understanding
53-1002373-02