Brocade Communications Systems MLX Series Installation Manual page 125

5. Install the router in the cabinet or rack using 8 10-32 screws. Refer to
FIGURE 74
6. Secure the transport brackets to the rear of the router using 10 10-32 screws, and to the
NOTE
The transport brackets provide extra stability, and must be installed if you plan to ship the device
while it is mounted in the cabinet or rack. Before you install the transport brackets, you must first
remove any installed fans.
FIGURE 75
Brocade MLX Series and Brocade NetIron XMR Hardware Installation Guide
53-1002373-02
Mounting Brocade MLXe-4, -8, or -16 routers in a 4-post rack or cabinet
Install the router in the cabinet or rack
cabinet or rack mounting posts using 6 10-32 screws. Refer to
Secure transport brackets to the device and cabinet mounting posts
B
B
Figure
A
A
2
Figure 74.
75.
107