Installation Precautions; General Precautions - Brocade Communications Systems MLX Series Installation Manual

Installing a Brocade MLXe Router
This chapter describes how to install a Brocade MLXe router and its modules in the following
sections:
•
•
•
•
•
•
•
•
•
•
The illustrations in this chapter display how to correctly insert the modules and routers. For a
complete router module description and slot number identification, refer to
routers"
NOTE
Illustrations in this chapter may differ slightly from the actual equipment.

Installation precautions

Read the following cautions and danger notices before installing Brocade MLXe routers.

General precautions

DANGER
The procedures in this manual are for qualified service personnel.
DANGER
All fiber-optic interfaces use Class 1 Lasers.
Brocade MLX Series and NetIron XMR Hardware Installation Guide
53-1002373-02
"Installation precautions"
"Installing 2x100GbE interface modules in Brocade MLXe routers"
"Installing a Brocade MLXe-4 router"
"Installing a Brocade MLXe-8 router"
"Installing a Brocade MLXe-16 router"
"Mounting Brocade MLXe-4, -8, or -16 routers in a 4-post rack or cabinet"
"Installing a Brocade MLXe-32 router"
"Attaching a management station"
"Activating the power source"
"Verifying proper operation"
on page 2 of this guide.
on page 63
on page 71
on page 80
on page 89
on page 109
on page 140
on page 141
on page 142
Chapter
2
on page 67
on page 100
"Brocade MLXe
63