Brocade Communications Systems MLX Series Installation Manual page 39

Management module LEDs
The LEDs on all management module models are the same.
management module.
TABLE 2
LED
Port 1
and
Port 2
Active
Pwr
10/100/1000
Ethernet Port
10/100/1000
Ethernet Port
Brocade MLX Series and Brocade NetIron XMR Hardware Installation Guide
53-1002373-02
Management module LEDs
Position State
Each adjacent to On or blinking
the auxiliary flash
slot that it
Off
represents
Lower Left On
Off
Upper Left On
Off
Above and right of On (Green)
RJ45 connector
Off
Above and left of On or blinking
RJ45 connector (Yellow)
Off for an
extended period
Router modules
Table 2 describes the LEDs on the
Meaning
The software is currently accessing the auxiliary
flash card.
The software is not currently accessing a auxiliary
flash card, although there is one inserted in the slot.
The module is functioning as the active
management module.
The module is functioning as the redundant
management module.
The module is receiving power.
The module is not receiving power.
A link is established with the remote port.
No link is established with the remote port.
The port is transmitting and receiving packets.
The port is not transmitting or receiving packets.
1
21