Brocade Communications Systems MLX Series Installation Manual page 287

FIGURE 187
1
CAUTION
Carefully follow the mechanical guides on each side of the power supply slot and make sure the
power supply is properly inserted. Never insert the power supply upside down.
4. Push the power supply faceplate toward the back of the router until the power supply
For information about connecting power to the router, refer to
information about powering on the system, refer to
Brocade MLX Series and Brocade NetIron XMR Hardware Installation Guide
53-1002373-02
Installing a power supply in a Brocade NetIron XMR 16000 router
2
Power supply 2 Release latch
connector engages the backplane connector.
Installing a Brocade NetIron XMR 16000 router
1
"Activating the power source"
"Connecting AC power"below. For
on page 297.
4
269