Brocade Communications Systems MLX Series Installation Manual page 122

2
Mounting Brocade MLXe-4, -8, or -16 routers in a 4-post rack or cabinet
8. Install the router in the cabinet or rack. The router slides into the rack on top of the mounting
FIGURE 69
9. Install the transport brackets to the cabinet or rack rails and to the side plates on the router,
NOTE
The transport brackets provide extra stability, and must be installed if you plan to ship the device
while it is mounted in the cabinet or rack. Before you install the transport brackets, you must first
remove any installed fans.
FIGURE 70
104
shelf. Secure the router to the rack rails using eight 10-32 screws. Refer to
slot router shown).
Install the router on the mounting shelf
using six 10-32 screws. Refer to
Attach transport brackets to router and to cabinet or rack
Figure 70.
Brocade MLX Series and NetIron XMR Hardware Installation Guide
Figure 69 (MLXe-4
53-1002373-02