Brocade Communications Systems MLX Series Installation Manual page 49

Power supply requirements for Gen-1 2-port or 4-port 10 Gbps Ethernet interface modules
Table 10
4-port 10 Gbps Ethernet interface modules.
TABLE 10
Router type
MLXe-4
MLX-4 and
Brocade NetIron
XMR 4000
MLXe-8
Brocade NetIron
XMR 8000
All 16-slot routers sixteen
All 32-slot routers thirty-two
Brocade MLX Series and Brocade NetIron XMR Hardware Installation Guide
53-1002373-02
lists the power supply requirements for each type of router when installing Gen-1 2-port or
Power supply requirements for Gen-1 2-port or 4-port 10 Gbps Ethernet interface modules
Number of Gen-1
2-port or 4-port Gbps
Ethernet interface
modules installed
three
four
four
seven
eight
eight
Power supply requirements
one 1200W PSU
for 1+1 redundancy, install two 1200W PSU
two 1200W PSU
for 2+2 redundancy, install four 1200W PSU
one 1200W PSU
for 1+1 redundancy, install two 1200W PSU
two 1200W PSU
for 2+2 redundancy, install four 1200W PSU
three 1200W PSU
for 3+1 redundancy, install four 1200W PSU
two 1200W PSU
for 2+2 redundancy, install eight 1200W PSU
four 1200W PSU
for 4+4 redundancy, install eight 1200W PSU
four 2400W PSU
for 4+4 redundancy, install eight 2400W PSU
1
Router modules
31