Brocade Communications Systems MLX Series Installation Manual page 308

4
Installing a Brocade NetIron XMR 32000 router
CAUTION
Be careful not to overtighten or cross-thread cable connector screws.
FIGURE 204
1 Cable bundles
Installing Brocade NetIron XMR 32000 router power supplies
DANGER
High Touch Current. Earth connection essential before connecting supply.
Follow the steps to install a power supply in a Brocade NetIron XMR 32000 router.
1. Remove the power supply slot blank.
2. Remove the power supply from the packaging.
3. Insert the power supply into the empty power supply slot, using the guides provided on either
290
Accessing modules by shifting cable bundles
1
side of the slot.
Brocade MLX Series and NetIron XMR Hardware Installation Guide
53-1002373-02