Brocade Communications Systems MLX Series Installation Manual page 195

FIGURE 125
1
3. Starting at the bottom of the rack, mount the router as shown in
FIGURE 126
1
4. Slide the router down so that the mounting screw heads are in the narrow portion of the
5. Tighten the screws to secure the router in place. For extra support, use additional screws.
NOTE
For better grounding of the router to the rack, attach the router using star washers. You should also
use star washers with any single-hole grounding lugs to keep the lugs from rotating.
Repeat step 2 through step 5 to mount each router in the rack.
Brocade MLX Series and Brocade NetIron XMR Hardware Installation Guide
53-1002373-02
Positioning the mounting screws in the rack posts
5"
1
Unequal flange equipment rack
people lifting the router, slip the wide portion of each keyhole slot over the corresponding
mounting screw in the rack post.
Mounting the Brocade MLX-16 router in a rack
1
Front-mount configuration
keyhole slots.
Installing a Brocade MLX-16 router
3"
2 Network equipment rack
2 Mid-mount configuration
3
2
Figure 126. With two or more
2
177