Brocade Communications Systems MLX Series Installation Manual page 224

3
Installing a Brocade MLX-32 router
Because you will need to use a mechanical lift to move and install the device, make sure you allow
enough space to operate the lift. You will also need at least two people to slide the router off the lift
and into the rack.
Once you have completed the preliminary installation preparations (refer to "Preliminary rack
mount installation steps" on page 199), follow these steps to mount your 32-slot router in a 4-post
rack or open cabinet.
1. Remove the factory-installed mounting brackets from the router chassis.
2. Attach the front right and left mounting brackets to the chassis using 12 8-32 Phillips flat head
screws (provided). Refer to Figure 143.
FIGURE 143 Attach front right and left mounting brackets to the router chassis
206 Brocade MLX Series and Brocade NetIron XMR Hardware Installation Guide53-1002373-02